- Q: What front derailleur do I need for my Sultan? [click here]
- A: All dw-link Turner's use a 34.9mm, Top-pull, Bottom-swing, Traditional Clamp.
Top-swing will NOT work. All Dual-Pull derailleurs must be modified, due to the bottom-pull arm as it will contact the chainstay yoke under full compression. Go to our tech page for information on how to modify Dual-Pull derailleurs.
No modification is needed for the following derailleur(s):
SRAM X9, Top-pull Only, # 00.7615.014.000
- Q: What fork length do I need for my Sultan? [click here]
- A: For the Sultan, the suggested fork travel length is 120mm.
- Q: What size seatpost is required? [click here]
- A: 30.9mm seatpost with enough length to guarantee 4" or 100mm of insertion.
- Q: What size headset do I need? [click here]
- A: 1 1/8" headset with 8mm of insertion into the headtube.
- Q: What size is the bottom bracket shell and what do you recommend for spindle length? [click here]
- A: The Sultan has a 73mm bottom bracket shell with english threads. If using a isis or square taper bottom bracket then a 73x113mm usually fits best.
All cranks with the "through spindle" designs work well.
- Q: How big a tire can I run on the Sutlan? [click here]
- A: The Sultan has the ability to run tires up to 2.35" with ample room for bent rims and mud clearance. This suggestion is due to variations in tread design, tire sizing and rim widths. Although larger tire sizes may fit properly but due to these case by case situations it is up to the rider, or dealer, to install an acceptable tire size.
- Q: What sag should I run in the rear shock? [click here]
- A: Proper sag on the Sultan is 15mm. Please reference your shock manual for further adjustments.
- Q: What Size shock and hardware does my dw-link Sultan use? [click here]
- A: The dw-link Sultan comes with a 7.5in X 2in Fox rp23. All of our shocks use the 21.8mm wide reducers with 6mm hardware. For more information regarding the Fox rp23 shock visit www.foxracingshox.com/fox_tech_center/ .
- Q: Which Shock will fit on my Sultan? [click here]
- A: The Sultan uses a 7.5" x 2" on 2009+ models [dw-link : 190.5mm X 50.8mm ] and a 6.5" X 1.5" on 2007-08 models [TNT : 165mm X 38mm].
• The Fox RP23 WILL fit. : as of January 1, 2010.
• The 2010 Fox DHX RC4 will NOT fit. : as of January 1, 2010.
• The Elka Stage 5 will NOT fit. : as of January 1, 2010.
Note: If you find that any of the above information is not current or if another shock brand does or doesn't fit, please let us know so we can update our informtion. Go to our Contact Us page..
- Q: Will the SRAM XX Gruppo fit on my Turner? [click here]
- A: Yes, but it is VERY Important to order the correct one.
• The 28/42 chainring combination,
• with a GXP bottom bracket,
• as well as a 166mm Q-Factor (Q166)
• and a 34.9 High-Mount Top-Pull Derailleur are necessary for proper fitment.
Please be aware that if your use any other SRAM XX setup it may not fit correctly and damage the frame and/or components. If this is at all confusing please consult your local Turner Dealer and/or go to the SRAM XX website.
- Q: Torque Wrench Specifications for my Turner are? [click here]
- A: These Torque Wrench Specifications apply to all dw-link Turners:
• Main Pivot 17 ft lbs
• DW Link 11 ft lbs
• Shock Bolts 7 ft lbs
• Clevis Bolts 5 ft lbs
If this is at all confusing please consult your local Turner Dealer for the proper mechanical procedure and tools.
|