MSRP* //
  • hd_spot_v4-2_hz1
    2013 Turner 5.Spot Pro
    $1,996.00
    Frame Options Tooltip
    Size
    Color
    Build-Kit Tooltip
    Shock Tooltip
Show Cart
 
Pro Build-Kit ::.
{ Build-Kits are subject to change due to availability. }

With the ultimate union of premier components and unparalleled turner performance, our Turner Pro Build-Kit is designed with the core rider in mind. Whether it is hammering out the miles day after day or looking for that racers edge, we think we have packed all the essentials into this kit for your Turner to ride beyond your expectations. This is in part due to Turner Bikes legendary service life and laterally stiff chassis thanks to our journal bearing system, 142x12 thru axle, post-mount disc brakes, dw-link, and zerk lubrication fittings. If your looking for the complete package that will not only dominate the field but also endure the elements, then this bike is the unrivaled choice in its class.

The drivetrain comes as a choice of either Shimano XTR+ or SRAM XX1. The Shimano XTR+ build comes as a 3x10 but can be changed to a 2x10 at no extra charge. Then the SRAM XX1 is the new 1x11 TYPE 2 drivetrain with the new 10x42 cassette matched up to a 34 tooth chainring.

Backed up by a host of top quality components from Thomson, Cane Creek, WTB Saddles, and ODI grips, this Turner Bike will not only turn heads but ride flawlessly.

Pro Shimano XTR+ Build-Kit Specifications
weight TBD
drivetrain Shimano XTR+, 2x10
fork FOX 34 Float FIT CTD, 15qr, 150mm
shock FOX Float CTD Evolution, 7.5x2
brakes Shimano XTR, 180/160mm
wheelset Stans Arch/ Speed Tuned, 32h 15qr
tires Conti Trail King [ 2.25/2.25 ]
headset Cane Creek 110
handlebar Race Face SixC
stem Thomson, 90mm
seatpost Thomson Masterpiece
saddle WTB Devo Team
grips ODI Lockon
msrp $ 6,534.00 USD
Pro SRAM XX1 Build-Kit Specifications
weight TBD
drivetrain SRAM XX1 TYPE 2, 1x11
fork RS Revelation RCT3, 15qr, 150mm
shock FOX Float CTD Evolution, 7.5x2
brakes SRAM X0, 180/160mm
wheelset Stans Arch/ Speed Tuned, 32h 15qr
tires Conti Trail King [ 2.25/2.25 ]
headset Cane Creek 110
handlebar Race Face SixC
stem Thomson, 90mm
seatpost Thomson Masterpiece
saddle WTB Devo Team
grips ODI Lockon
msrp $ 6,034.00 USD
- All drivetrains are available in 2x10 or 3x10. Standard is 2x10 so be sure to specify 3x10 if desired.
- The XX1 build kit comes with a 10x42t cassette and a 34t Chainring. And the rear derailleur is the new TYPE 2 version.
- The FOX Float CTD Factory with Kashima coating is available as an optional shock choice.
† Our shocks come custom tuned from Fox Shox for our bikes specifically, which has a very low- compression and low- rebound setting. This is crucial for the dw-link to perform to its fullest which is why we opted to spec our bikes with the FOX Float CTD.
‡ MSRP is shown for a 5.Spot frame in the Raw finish with the selected build-kit choice and stock Fox CTD Evolution rear shock. Anodized and Laser can be upgraded for 250. FOX CTD Factory with Kashima can be upgraded for 150.
5.Spot VER. 4.2 ::.

Enduro Trail / Adventure XC - The Turner 5.Spot revolutionized the trail bike class in 2003 and now, ten years later, it continues to raise the bar for unparalleled ride quality. With the addition of the dw-link in 2009 and now the newly updated trail geometry, the 5.Spot pedals like a xc rocket while still handling like a gravity built machine. Never has the pendulum been swung so far and still remain so perfectly balanced. And then there is the 44 headtube, anodized & laser etched finish, burrito gusset, ISCG 05 Mounts, no more zip-ties, increased shock clearance and more. . . Rider Scale

Here is the Turner 5.Spot.

{ All Measurements are given in Inches and Pounds. }
travel::. 5.5in
{ 140 millimeters }
class::. Enduro Trail / Adventure XC
specifications::.  
  • shock: FOX Float CTD Evolution
{ 7.5x2 }
note: The FOX Float CTD Factory with Kashima coating is available as an optional upgrade.
• F. Der: 34.9mm
{ trad'l top-pull }
note: dual pull will work with modification. see tech page for details.
• R. Axle: 142x12 Thru
{ DT RWS X-12 alloy }
stock colors::.  
  Ano Blue  • Ano Black  • Raw  • Custom Color*
note: due to the nature of the anodizing process, colors may vary.
* Custom colors are available as an optional upgrade.
Gold Dust Orange Copper Candy Red Candy Purple Charcoal Metallic Blue Johnny’s Blue Candy Blue Granny Smith Green Gloss White Sparkle Silver Iron Glimmer Grey Charcoal Metallic Smoke Black Semi-Gloss Black
(click on the color swatch to see a larger image with the color name)
Geometry ::.
{ Listed geometry based on a 525mm axle to crown fork with a 26"x2.3" tire, acceptable fork travel range: 130-160mm }
  sm md lg xl 2xl all  
a: virtual tt 22.5 23.0 23.6 24.5 25.3 g: head angle 67.7°
b: seat tube 15 17 19 21 23 h: seat angle 73.0°
c: head tube 3.7 4.5 5.3 6.1 6.8 i: chainstay 16.9
d: stack 22.3 23.1 23.8 24.6 25.7 j: bb height 13.5
e: reach 15.3 15.6 16.0 16.4 17.1 bb shell 73mm
f: standover 28.9 30.2 31.0 32.0 33.0 seat post 30.9mm
frame weight 6.7 6.8 7.0 7.1 7.3 head tube 44mm
rec'd rider size 5'2-5'6 5'6-5'10 5'10-6'1 6'1-6'4 6'4 +  
Geometry Key

* Inseam measurements are fine for pant shopping, but have no place in mountain bike shopping. Leg length is what is important as rarely does anyone buy pants that have the same inseam as their actual leg length. Since no one rides barefoot the leg length should be measured with your mountain bike shoes on standing against a wall and with a carpenters square or large sized book firmly raised into the crotch and square to the wall is how to figure leg length.

Turner Bikes measures ‘Standover’ height 6” / 150mm in front of the BB center, that is roughly the MIDDLE of the Top Tube, not at the actual lowest point way back at the junction with the Seat Tube as some companies do. The allows for plenty of standover clearance without the nose of the seat crushing into your spine!

Geometry Key

A: Effective Top Tube - Is measured from the center of the head tube to the center of the seat tube along a horizontal line parallel to the ground.

B: Seat Tube Length - Is measured from the center of the bottom bracket to the top of the seat tube collar.

C: Head Tube Length - Is measured from the bottom edge to the top edge of the head tube.

D: Stack Height - Is measured along a vertical line from the center of the bottom bracket until it intercepts the imaginary Reach Length line.

E: Reach Length - Is measured along a horizontal line from the center of the head tube until it intercepts the imaginary Stack Height line.

F: Stand Over Height- Is measured from the ground along a vertical line to the top of the top tube 6” / 150mm in front of the BB center, that is roughly the MIDDLE of the Top Tube.

G: Head Tube Angle - Is measured from a line along the head tube and a horizontal line parallel to the ground.

H: Seat Tube Angle - Is measured from a line along the seat tube and a horizontal line parallel to the ground.

I: Chain Stay Length - Is measured from the center of the bottom bracket along a horizontal line to the center of the rear wheel axle.

J: Bottom Bracket Height - Is measured from the center of the bottom bracket to the ground.

 

This Geometry Key is only a visual aide. All Specifications are subject to change.

Features ::.
dw-link //
Simultaneously engineered anti-squat and wheel rate curves are the mathematical formulas that make dw-link the world's most efficient and traction-aiding suspension system.

The dw-link is the only design on the market that is able to control unwanted bob and still remain active in more gear combinations than any other design. Dave Weagle has been refining the mathematics of optimum pivot locations of the dw-link on everything from World Cup winning downhill bikes to short travel XC flyers.
journal bearing system //
The use of journal bearings, or 'bushings' as some in the bike industry call them, is a perfect solution for the high shock load and abusive limited range of motion that bicycle suspensions put on the pivot system.

Our Journal Bearing system utilizes hard anodized aluminum pivot shafts and Kevlar composite bearings. Since it is not made of steel this system is not capable of rusting and has substantial weight savings over its cartridge style counterparts. Then with the zerk lubrication fittings found at every pivot location, our Journal bearing system has an unrivaled service life, even in the harshest of environments.

The design of our Journal Bearing System is built into the frame to work seamlessly with the suspension. By not using an off-the shelf bearing we are able make use of the entire width of the pivot area. This eliminates any torsional flex in the back end and is why our bikes have legendary handling & stability.
finite element analysis (fea) //
A mathematical technique for analyzing stress points, which breaks down a physical structure into substructures called 'finite elements'. These finite elements and their interrelationships are then converted into equation form and solved mathematically.

We use an FEA computer program to aide in the design of every Turner frame. This helps us maximize the strength and minimize the weight to insure a perfect balance is acheived as form follows function is the convention we adhere by.
anodized frame finish //
Due to the tough nature of anodizing and the permanence of lazer etching it fits well with the extremely long life riders get out of their Turner Bikes.
44 headtube //
This head tube is perfectly sized to work with a tapered steerer fork and the new 44XX lower head set bearing from Cane Creek. Stiffness gains of up to 20% can be had with a tapered steerer fork. With the upper bearing bore now at 44mm, the rider has the ability to run a ZeroStack headset on top. This setup will lower the hand position up to 10mm for more control on steep climbs and fast descents, where front end traction is enhanced through transferring the riders weight over the handle bar. Our 'just right' head tube design allows for the biggest bearing size on the bottom for a long head set life.
post-mount disc brakes //
The biggest reason why Turner Bikes chose to pioneer the use of post-mount rear brake mounting was to eliminate the adapter. All disc brake manufacturers and all new fork designs had already gone to the post-mount calipers due to the ease of set up and the increased rigidity provided. Plus, with the decision to create the post-mount rear dropout we removed two bolts that were doing nothing but adding weight and potential flex. An exceptional design begins with simplicity and commonsense.
threaded zerk grease fittings //
Zerks are stainless steel, ultra compact, custom made proprietory fittings to aide in the lubrication and maintenance of all the pivots on a Turner frame. It only makes sense that a machine that is used in the rough and many times sees wet conditions, that it would have a way to push the grit and water out easily and on regular basis. This is one of the key features that makes the ownership of a Turner cost effective over the long haul.
burrito vs. taco //
Moving into 2011 we created a custom drawn, differentially dimensioned tube to replace the taco shell style seat tube/ top tube gusset of the past. This design will spread the load across the top tube and seat tube more efficiently with its convex top surface. This is due to the shape and varying wall thickness of the burrito to control how the stress is dispersed through the frame.
improved cable routing //
In order to make sure that no one had unwanted contact with the bike we created a special machined part to pass the rear derailleur cable directly through the tube on the right side of the rear end.

Find a dealer

Enter your zipcode here.
 

Turner Rider Dirt

Join our monthly newsletter here.
Email address:


 
Join the Turner Team on Strava
Find Turnerbikes on Facebook
Follow Turnerbikes
Turner Newsletter Sign-up